PORSCHE CAYENNE TURBO AIR CON
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Led tail lights with integrated brake, fog, reverse and indicator light
- euro-approved (homologation).
- led tail light for 2005 to 2008 997.1 models.
- compatible with on-board computer*
*the canbus units are integrated into the tail light, modifications are not necessary (plug and play).
You may experience condensation with these lights. However the lights are specially designed to protect against the effects of condensation.
A frequently disputed issue is fogged glasses inside the lights, this has been around since the early 911, 964, etc. This effect occurs after driving in rain or cold nights, and is a normal physical process. Through the light vents the expanding heated air gets discharged...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08
This item is oversize and will incur a domestic shipping charge of $89.
An aggressive look for your 944 turbo or s2. This vented nose panel is made with heavy-duty fiberglass to give a racing look to your Porsche. On the turbo, it's more than good looks. In testing at laguna seca raceway, we consistently went faster with the vented nose panel, lowering our lap times by a full second! The secret is improved air flow to the intercooler. this item is oversize and will incur extra shipping charges. This is a special order item and may not be in stock when you order it. Please call for availability.
This is a fiberglass part and may have to be body worked to fit properly.
General Fitment 944 1985-88 944 1989-91
The Porsche 997 turbo is an incredible machine that can reach unbelievable top speeds in its stock form. taking this car to the track however requires some increased downforce. downforce helps the car in traction by keeping the rear end planted on the ground. modeled after the GT2 rear wing blade, agency power has released this add on wing to work with the stock decklid. not only functional, this rear wing also adds style! the wing blade ends extend out and turn down to knife through the air. the wing blade follows the rear fender lines to give you that more aggressive look.
The high glossy carbon fiber blade is done using a prepreg process with 2x2 carbon sheets. the process means the carbon work is ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$1,800.00
Make a selection
"brombacher" 996 tt (sound version) stainless steel exhaust system
Facts:
- + 30 crank hp & + 22 crank torque
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s sep...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,873.20
Make a selection
"brombacher" 996 GT2 (lightweight version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 4 x 3.5"(90mm/80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,230.60
Make a selection
Ksport procomp front big brake kit 15 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temper...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,104.00
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h (193mph)
Max. Rpm -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,909.90
Make a selection
Ksport procomp front big brake kit 14 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperat...(choose a part on the right to read more)
General Fitment 911 1998-05
$2,693.25
Make a selection
"brombacher" 997 tt (sound version) titanium 4 chamber exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts with titanium outer shell
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9kg)!
For comparison the stainless version weighs 51 lbs. (23 kg)
- 1000 degree celcius, high grade titanium material
- 4 x 3.25"(80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary...(choose a part on the right to read more)
General Fitment 911 2005-08
$12,320.00
Make a selection
Product details:
Complete high-performance exhaust solution for the Porsche 993 turbo; fantastically daily drivable sound and power from fabspeed's supercup exhaust system, sportcat x-pipe, sport headers with heat, cup high performance air box cover, bmc f1 air filter and ecu tuning upgrade.
Includes:
993 turbo supercup exhaust system incl. Deluxe oval style tips
993 turbo sport cat x-pipe
993 turbo sport headers with heat
993 turbo cup high performance air box cover
993 turbo bmc f1 air filter
993 turbo ecu tuning upgrade
Features:
-fits all Porsche 993 turbo / turbo s vehicles (1995-1998)
-constructed from t304 stainless steel, c.n.c. Mandrel bent tubing for maxim...(choose a part on the right to read more)
General Fitment 911 1994-98
From $7,750.00
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 911 turbo 930; includes dual outlet muffler with dual or quad style deluxe tips, sport headers with heat and air intake system.
Includes:
-911 turbo (930) dual outlet muffler (incl. Deluxe dual or quad style tips)
-911 turbo (930) sport headers with heat
-911 turbo (930) air intake system
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-increases horsepower and torque by 46 whp and 33 ft-lbs
-dramatically improves sports car sound with a deeper exhaust note.
-constructed from t304 stainless steel, 14-16 gauge c.n.c. Mandrel bent high v...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $4,050.00
Make a selection
Purchase disclaimer: fabspeed motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 cfr section 86.1854.12(a)(3), clean air act 40 cfr 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
The 2020 Porsche 911 Carrera is the next generation of Porsche flat-six twin turbocharged engines that have been further developed and are more powerful than ever before. ...(choose a part on the right to read more)
$3,695.95
Make a selection
Car enthusiast will typically upgrade there vehicles performance piece by piece. Fabspeed has made it convenient for you and put together there fabspeed performance package for the Porsche 993 turbo turbo s GT2. The fabspeed performance package includes muffler, sportcats, headers, air intake, bmc filter and tips
Fabspeed performance package specs
Fits all 993tt vehicles 1995-1998
General Fitment 911 1994-98
$8,243.30
Make a selection
Gruppe m ram air intake system Porsche 930 turbo 81-89
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped sp...(choose a part on the right to read more)
General Fitment 911 1978-83
$3,365.42
Make a selection
Fabspeed's performance package for the Porsche 997 turbo offers massive increases in horsepower and torque by 74 whp and 78 ft-lbs of torque.
This is a complete high performance exhaust and intake solution that includes maxflo performance mufflers (includes sport catalytic converters), sport performance headers, deluxe quad style tips, and competition air intake.
Features:
Sound level: mild
General Fitment 911 TURBO/GT2 2007-09
$8,714.59
Make a selection
Complete high-performance exhaust & intake solution for the 997.2 turbo.
Includes:
997.2 turbo/turbo s supersport x-pipe
997.2 turbo/turbo s sport headers
997.2 turbo/turbo s sport catalytic converters
997.2 turbo/turbo s deluxe quad style tips - polished chrome or black chrome
997.2 turbo/turbo s competition air intake
Features:
Fits all Porsche 997.2 turbo / turbo s vehicles (2010-2012)
Dramatic improvement in sports car sound and power throughout the rpm range
Includes high performance 200-cell hjs sport catalytic converters for improved flow and exhaust sound
Constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
Sp...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13 911 2009-12
From $6,750.00
Make a selection
Dual-conical air intake system is a direct high-performance replacement for the factory air box
Features:
Fits all Porsche 997 turbo vehicles (2006-2009)
High performance dual-conical air filters are included
Uses dry-style filters that do not require oiling; simply wash with warm water and reuse
Improves power across the rpm range; noticeable increase in throttle response and acceleration
Simple diy installation with common tools
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 2005-08
Fabspeed's performance package for the Porsche 997 turbo offers massive increases in horsepower and torque by 74 whp and 78 ft-lbs of torque.
This is a complete high performance exhaust and intake solution that includes maxflo performance mufflers (includes sport catalytic converters), sport performance headers, deluxe quad style tips, and competition air intake.
Features:
Sound level: mild
General Fitment 911 TURBO/GT2 2007-09
$8,714.59
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-pro...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
Keep your brake temps under control with our brake air duct kit. Available with or without fog lights.
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98)
General Fitment 911 1994-98
K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection
Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection
K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharg...(choose a part on the right to read more)
$2,976.60
Make a selection
FVD diverter valve is a direct replacement for the OEM valve. Comes in black only, not blue.
Prevents boost leaks and "recovers" quicker for better boost and throttle response.
Why replace the OEM diverter valve with an "FVD diverter valve"?
Under higher boost pressures the Bosch valve can start to leak (plastic housing). The plastic cover begins to lift off the sealing face as the internal spring's resistance is exceeded. Our diverter valve is made out of aluminum.
Between shifts or sudden throttle lift-off the compressor wheel is still spinning very fast and pumping air at the closed throttle plate, as well as placing strain on the intercooler, hoses and fittings. The diverter valve keeps air f...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 1994-98 911 1989-94 911 1987-89 944 1985-88
The moshammer evo 2 front chin spoiler blends a bit of Porsche heritage into its design with canard style winglets. This effective design transforms turbulent air into a more laminar flow, creating added downforce. Porsche active aerodynamics remains fully functional in all 3 positions and the evo 2 chin spoiler secures seamlessly into the factory locations. The evo 2 spoiler's design offers a more aggressive look but also blends perfectly with other design elements like the side skirts and rear spoiler. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of either the evo rs (991.2 turbo/s) or downforce rs...(choose a part on the right to read more)
$1,386.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|